RIGOL DP832 User Manual

Page 120

RIGOL

2-70

DP800 User’s Guide

The first line: instrument serial number (press Utility  Sys Info to
acquire the serial number of the instrument);

The second line: the option license;

The third line: a blank line (cannot be omitted).

Note: The hyphens are not included in the option license.

The option installation procedures:



Edit the option installation file according to the above requirements

and store it into a USB storage device.



Turn on the instrument and insert the USB storage device. Press Store
to enter the store and recall interface.

 Read the option installation file following the steps below in the store

and recall interface (refer to "Store and Recall").

Select "D:"  set the file type to "All File"  select the installation file

mentioned above  press Read.

3) Send SCPI command

Open the remote control window and send the option installation command

(:LIC:SET ) by referring to "Remote Control".

Wherein, is the option license (note that the hyphens should be

omitted).

For example, :LIC:SET UVF2L3N3XXKYTB73PPRSA4XDMSRT.

If the option is successfully installed, the prompt message informing you that

the option installation succeeds will be displayed; otherwise, the corresponding

error message will be displayed.