RIGOL DP832A - Manual (Page 90)

RIGOL Chapter 2 Front Panel Operations
2-36 DP800A User’s Guide
Table
Display each group of voltage, current and power of the current channel in
the record file opened in table form.
Tip
 You can view the analysis results of the specified channel by
switching the current channel.
 You can view the specified group of data by setting the “Current
Time”.
 Current Time
You can quickly locate each group of data between the start time and end
time of the record file opened by setting the current time. If the current
display mode is figure, the interface will locate the current data (the voltage,
current or power corresponding to the “Current Time” is displayed above
the figure) using a cursor line in the color corresponding to the current
channel.
Press Cur Time and use the numeric keyboard or the left/right direction
key and knob to set the desired value. The range is from the start time to
the end time.