RIGOL DP832A - Manual (Page 135)

Chapter 3 Remote Control RIGOL
DP800A User’s Guide 3-11
(c)
Note: If the test fails, please check whether the instrument can communicate
normally with the PC via the RS232 cable and whether the RS232 parameters of
the software match with the current settings of the instrument.
4. View the device resource
The name of the RS232 device resource added will appear under the “RIGOL
Online Resource” directory.
For example, DP831A (ASRL1::INSTR).
5. Control the instrument remotely
Right click the resource name “DP831A (ASRL1::INSTR)” to select “SCPI Panel
Control” to turn on the remote command control panel through which you can
send commands and read data.