RIGOL DP832A - Manual (Page 133)

Chapter 3 Remote Control RIGOL
DP800A User’s Guide 3-9
If resource cannot be found automatically:
 Select the GPIB card address of the PC from the dropdown box of “GPIB0::”
and select the GPIB address set in the power supply from the dropdown box
of “0::INSTR”.
 Click to check whether the GPIB communication works
normally; if not, please follow the corresponding prompt messages to solve
the problem.
5. View the device resource
The resource found will appear under the “RIGOL Online Resource” directory.
For example, DP831A (GPIB0::18::INSTR).
6. Control the instrument remotely
Right-click the resource name “DP831A (GPIB0::18::INSTR)” to select “SCPI
Panel Control” to turn on the remote command control panel through which you
can send commands and read data.