RIGOL DP832A - Manual (Page 13)

RIGOL
DP800A User’s Guide XI
cycles of channel on/off toggle
 Provide built-in digital trigger to realize digital trigger input and trigger output
functions
 Provide built-in on-line analyzer to perform on-line analysis of various statistic
parameters
 Provide built-in monitor to monitor the output according to the user-defined
monitor condition
 Provide built-in recorder to perform background recording of the output state
after power-on according to certain record period
 Provide dedicated preset key to perform one-key reset and one-key recall of the
commonly used output voltage and current configurations
 Support serial and parallel output functions
 Support on-line self-test and manual calibration functions
 Provide store and recall function
 Support voltage and current linear programmable functions
Complete Interface Configurations and Flexible Control Method:
 Standard configuration interfaces: USB HOST, USB DEVICE, LAN, RS232, Digital
I/O, Rear Output Interface (DP811A)
 Support to extend a GPIB interface via the USB-GPIB interface converter
(option)
 Support USB storage device storage
 Support SCPI remote command control
 Conform to LXI Core 2011 Device instrument standard
 Provide standard 9 pin RS232 interface with flow control function
 Provide 4-wire digital I/O interface which supports the trigger input/output
function