RIGOL DP832A - Manual (Page 117)

Chapter 2 Front Panel Operations RIGOL
DP800A User’s Guide 2-63
Preset Setting
Press Utility  Preset to define the setting recalled by Preset at the front panel.
Pressing Preset can restore the instrument to factory setting or recall the
user-defined settings.
To Restore to factory setting
Press Utility  Preset to enter the interface as shown in the figure below. Press
Preset Key to select “Default” or any of the 4 groups of user-defined settings and
by default, “Default” is selected. When “Default” is selected, pressing Preset at the
front panel will restore the instrument to factory setting as shown in Table 2-2 on the
next page.
Figure 2-14 Preset Value Type Selecting Interface