RIGOL DP832A - Manual (Page 37)

Chapter 1 Quick Start RIGOL
DP800A User’s Guide 1-19
Table 1-4 DP800A user interface explanation
No. Explanation
1 Voltage and current setting values
2 Overvoltage and overcurrent protection setting values
3 Actual output voltage
4 Actual output current
5 Actual output power
6 Channel output mode
7 Menu bar
8 Channel number
9 Channel output status
10 Channel output voltage/current (channel currently selected)
11 Status bar. Display the system status labels.
: over-temperature protection is enabled
: the front panel is locked.
: the network is connected.
: USB device is recognized.
: the beeper is enabled.
: the beeper is disabled.
: the instrument is in remote mode.
Tip
 For DP831A/DP832A, when the current display mode is “Normal”, “Waveform”
or “Classic”, press at the front panel to quickly switch between the current
display mode and dial display mode.
 For DP821A/DP811A, when the current display mode is “Normal” or
“Waveform”, press at the front panel to quickly switch between the current
display mode and dial display mode.