Riello UPS PowerShield³ User Manual
Page 83
UPSMON User Manual
Troubleshooting
• 83
Please print out the help documents with ”man termadd”. All options are stored for this command. With
”termdel” this port is deleted. With ”termshow
⎜ grep UPS” the configuration can be displayed.
f.
Using SCO-computer systems a terminal translator (mapchan or mapkey) may be mapped on the
configured tty port with /etc/default/mapchan (in most cases only on com1/ttya). This causes a malfunction
of the RS 232-port. Check if this process is active and delete it if necessary. Check in the file /etc/gettydefs,
which baud rate has been assigned to the port and change it to correspond to the UPS-parameter.
g.
HP UNIX computers sometimes have the following entry in the inittab: ups0:: respawn:rtprio 0
/usr/ups_mond -f /etc/ups_conf. In the SAM menu Peripheral Devices > Uninterruptible Power Supplies
this entry is to be found, but not activated. But this causes the device not to work correctly with UPSMON.
Delete this entry and restart.