Riello UPS PowerShield³ User Manual
Page 66
66
• Uninstallation of the UPSMON
UPSMON User Manual
If the Upsagent is not running on the system, it is possible to select a UPS directly by the IP address of the computer or SNMP adapter
where the UPS is connected. To do this set the IP address and device number (usually 1), the Upsview will then try to find the specified
system by IP address, host names or DNS names are also supported.
Remote connection made via TCP/IP protocol. The default UDP port for the Upsagent is 33000.