2 network services – Riello UPS PowerShield³ User Manual
Page 18

18
• Advanced UPSMON Configuration
UPSMON User Manual
1.2
Network services
Parameter name
Parameter description
Default
TCP/IP Service: Server enabled
Enables or disables the connection access of other computers running
the Upsagent or Upsview programs.
Enabled
TCP/IP Service: UDP Port
The UDP communication port. This must be same on all system using
UPSMON
33000
SNMP Service: SNMP enabled
Allows the support for SNMP. The data and the status of the Ups can
be monitored via SNMP.
Disabled
HTTP Service: HTTP enabled
Allows the support for HTTP. The data and the status of the Ups can
be monitored via HTTP through the html static page created by
Upsagent.
Disabled
HTTP Service: HTTP path
Used to specify where the Upsagent creates the html static page with
the UPS data and status for HTTP monitoring.
Empty
WAP Service: WAP enabled
Allows the support for WAP. The data and the status of the Ups can
be monitored via WAP.
Disabled
Ignore remote UPS commands
Enables or disables access from remote computers to make
commands to the UPS(by Upsagent or Upsview). This feature is used
to prevent a remote user from forcing a command to the UPS, such as
UPS shutdown or test etc.
Disabled
Password protection
If selected the software will require a password for communication
with the UPS. This password is to protect the Upsagent connection. If
the user doesn’t know the password, it will not be possible to connect
the agent.
Disabled