Riello UPS PowerShield³ - Manual (Page 13)

UPSMON User Manual Simple UPSMON Configuration (Wizard) • 13
2. Wizsetup for JAVA and MAC OS X
ATTENTION: If the Wizsetup program is started for first time, the software will require a PRTK code, therefore when prompted
enter the correct PRTK code for the UPS to be monitored, this code is located on a label which can be found on either the front
or the rear of the UPS, and failure to input this code will prevent the operation of UPSMON.
The basic configuration of UPSMON performed using the Wizsetup program is due in three step. Is possible to open the configuration
complete program Upsetup by clicking the button with the caption Upsetup.
1. Welcome page: in this page is possible to select the language of UPSMON.
2. UPS Configuration page: in this page is possible to configure UPS parameters and the connection parameters to
use to communicate with UPS.