Riello UPS PowerShield³ - Manual (Page 57)

UPSMON User Manual Uninstallation of the UPSMON • 57
1.2 Upsview menus
1.2.1 Refresh Menu
Used to find on the local network, all of the agents (remote Upsagent or SNMP adapter) that are activated at any particular moment
without remembering the individual name or address. The refresh will take about ten seconds. The IP address of the active agents and
the Ups that they controlled will be put in the tree under Remote voice.
1.2.2 View Menu
Used to switch between Upsview visualizations. There are three visualizations: graphic (Standard), numeric (detail) and Block Scheme.
ATTENTION: The following screen shots below are only examples and will vary between different UPS system.
Graphic (Standard) visualization: