RISCO Group Upload/Download software - Manual (Page 6)

Chapter 2: Hardware Installation
Page 3
Chapter 2: Hardware Installation
2.1 System Requirements
Computer:
Processor:
RAM:
Available disk space:
Operating System:
Minimum required 486
All Pentium processors are suitable
Minimum 128 K
Minimum 45 MB
Windows 98, Windows 2000, Windows
XP and Windows NT
Accessories: CD Drive
For direct U/D via your laptop
PC: Cable with connectors for the computer
and the panel
RP296EBA00A: RS232 to the RS485
converter, RP128EUSB00A: USB to the
RS485 converter for Orbit‐Pro and above
RP205LU for Orbit 5
RP214LU00000A for Orbit 6 & 14
For remote Upload/Download
via modem, phone line, GSM or
IP connection (according to the
type of panel): Modem: see Systems Configuration in
the Options menu.
Phone lines at both panel and computer
locations
GSM: see Systems Configuration in the
Options menu.
IP connection: see ACM
2.2 Hardware Setup
Programming the security system can be done in several ways according to the type of panel: locally,
remotely via modem or GSM, or via IP.
Local:
The following diagram is the local system connection:
To establish direct cable connection from your computer to the panel:
1. Connect the BUS adapter (depending on your panel) to your computer.
PC CONTROL
PANEL
BUS ADAPTER
R8485