RISCO Group Upload/Download software - Manual (Page 33)

Chapter 5: Main Menu Bar Options
Page 30
5.3 Installer Menu
Note: Installer menu options depend on the type of panel you own. Not all the Installer menu options and
sub‐options appear for all the panel types. Refer to each panelʹs manual for detailed information of each
option.
5.3.1 ProSYS Installer Menu Options
System
Parameters: To set the general systemʹs parameters. 1. System
From the main menu select
Installer>System and one
of these options:
System Codes: You can define installer codes such as Grand
Master, Installer, Sub‐Installer as well as allocate
Upload/Download Remote Access & ID codes. You
can define which fields to block via the MS Lock.
Dialer 1: To set the Control Panelʹs Digital Communicator
dialing parameters to the Central Station.
Dialer 2: To set the rest of the Control Panel Digital Dialer
parameters.
ACM: To set the ACM parameters.
Note: You must first update your IP in the client information
screen before setting ACM parameters.
2. Communication
You can set the systemʹs
communication
parameters. From the main
menu select
Installer>Communication
and one of these options:
GSM: To set the GSM parameters.
Keypads:
Zone expanders:
UO expanders:
Power supplies:
Event loggers:
WL button
expander:
Printer:
Access control:
Voice module:
Digital key
expander:
3. Expanders
From the main menu select
Installer>Expanders and
one of these options:
Siren:
To set the type and configuration of each expander
in your system.
4. Diagnostics Bus test: For performing bus test and reviewing the test
result.