RISCO Group Upload/Download software - Manual (Page 23)

Chapter 4: Getting Started
Page 20
To establish PSTN/GSM modem connection from your GSM to the panel:
1. Activate the Upload/Download software.
2. In the Client information screen type in the Panel phone number and select the Remote/Fast Remote
connection type (see section 5.1).
3. From the Main menu select Options>System Configuration. The System Configuration dialog box
appears (see section 5.2.2).
4. Enter the relevant Remote Com Port.
5. Fill in the Modem Setup fields. Make sure that you check the Wait for dial tone checkbox, update the
dialing method and select the correct Modem type from the drop‐down list and click OK.
Note: Select a modem that is compatible with the type of connection you have chosen, from the Modem type drop‐down list.
6. From the Main menu select Installer>Communication>Dialer 1. The Dialer parameters 1 screen
opens. When filling in the fields make sure that the U/D GSM enable checkbox is checked (see
section 5.3.2).
7. From the Main menu select Installer>Communication>Dialer 2. The Dialer parameters 2 screen
opens. When filling in the fields make sure that you fill in the Dial tone wait time field (see section
5.3.2).
8. From the Main menu select Installer>Communication>GSM. Select GSM from the Type drop‐down
list. Update the rest of the fields (see section 5.3.2).
Note: For detailed information of GSM parameters refer to the GSM manual.
9. Check that communication has been established, from the Main menu select Comm>Dial to panel or
click on the Dial icon. When communication has been established, set the time and date (see section
5.5).
Note: The status of the connection appears in the lower bar of your screen. Green means that connection has successfully been
established.