RISCO Group Upload/Download software - Manual (Page 38)

Chapter 5: Main Menu Bar Options
Page 35
5.3.3 Orbit-Pro and Pro-24 Installer Menu Options
Note: Communication with the panel
must be open. Test bells and
keypads:
Zone parameters:
Zone crossings:
5. Zones
For setting zone configurations,
from the main menu select
Installer>Zones and one of
these options:
Zone self‐test:
See ProSYS table above.
Report codes:
Special report codes:
Auto SIA codes:
Auto contact ID codes:
6. Report Codes
For setting the reporting codes
in the system, from the main
menu select Installer>Report
Codes and one of these options:
Reset codes:
See ProSYS table above.
7. Utility Outputs
For setting the Utility outputs
in the system, from the main
menu select Installer>Utility
Outputs.
See ProSYS table above.
8. User Codes
For setting the Authority levels
in the system database, from
the main menu select
Installer>User Codes.
See ProSYS table above.
9. WL Button
For setting the WL button in
the system, from the main
menu select Installer>WL
Button.
See ProSYS table above.
5.3.4 Orbit-6 Installer Menu Options
1. System Parameters
From the main menu select
Installer>System Parameters
You can set the general systemʹs parameters.
2. System Codes
From the main menu select
Installer>System Codes
You can define installer codes such as Grand Master,
Installer, Sub‐Installer as well as allocate
Upload/Download Remote Access & ID codes.