5 delete log, 6 batch operations, 7 run batch – RISCO Group Upload/Download software User Manual
Page 31: 8 background color, 9 screen lock
Chapter 5: Main Menu Bar Options
Page 28
5.2.5 Delete Log
To delete the history log:
From the main menu bar, select Options>Delete log. The Delete History log dialog box appears.
Click Yes. All previous activities are removed from the log.
5.2.6 Batch Operations
It is possible to set a group of operations that the Upload/Download software will perform automatically
when the Control Panel dials, in one batch. In this way it is possible to postpone the operations for non
busy time. These operations and the order that they will be performed include the following: Disarm
Partition, Time Set, Upload, Download, Save Status and Arm Partition.
To set a batch operation:
From the main menu bar, select Options>Batch operations. The Batch operations dialog box appears.
Select the relevant operations.
5.2.7 Run Batch
Run batch enables you to set the Batch operations to standby up to 24 hours in advance, until the panel
call mode arrives.
From the main menu bar select Options>Run Batch. When a call comes from the panel, the ID and
Access codes will be verified and then the Batch operation is run according to the settings defined. When
the Batch operation is complete, the system terminates communication.
You can press
5.2.8 Background Color
You can change the software screen background color. From the main menu, select Options>Background
color. The background color dialog box appears. Select the preferred color and click OK.
Note: You cannot change the Client Information and Status screensʹ background color. In these cases you will be unable to select
this option as it appears in gray in the sub‐menu.
5.2.9 Screen Lock
The administrator can protect the software from access by locking the screen or disconnecting
communication. You can choose to lock the screen or disconnect communication after a certain period of
time has passed, when idle or after a certain number of bad login attempts to protect the system from
access. From the main menu, select Options>Screen Lock. The Screen Lock\Disconnect Communication
dialog box appears. Type the number of minutes or attempts in the different options and click OK. Enter 0
if you do not want to lock the screen.