RISCO Group Upload/Download software - Manual (Page 29)

Chapter 5: Main Menu Bar Options
Page 26
MS lock Type in a 6 digit code.
If the MS lock is not the same as that on the panel, the
following fields cannot be uploaded or downloaded:
Installer Code
MS Phone Numbers (in Dialer 1)
MS Lock Code
Default Jumper Y/N
The MS lock in the panel can be changed periodically for
security reasons. If it has been changed in the panel, the new
MS lock must be typed in here for all the screens to be
accessible.
Modem Parameters:
Wait for dial tone Place your cursor in the box and click to insert . Click
again to delete.
Rings to answer Click on the arrows to set the number of rings for Callback.
Speaker volume
Dialing method
Modem type
Modem speaker Click on the arrow to open the drop down list for each of
these parameters. Place the cursor on the required option
and click to select.
User Modem string For use if a modem type is used and it is not listed in the
modem type drop down list.
For information about the user modem string – refer to your
modem manual.
Backup path The system provides backup options for storing information.
The default is C/:. If you use an alternative backup – type in
the details in this field. (For more information on alternative
backup settings, contact your RISCO Group representative.
Code Table Enter the name of the file for using non‐Latin characters in
messages to appear on the LCD. For more information
about the available files, contact your RISCO Group
representative.
5.2.3 Operators
Each person who is authorized to use the Upload/Download software should be registered as an operator
within the software. Each operator is assigned a password that he uses when he activates the software.
When you activate Upload/Download for the first time, you use the default password. You can have up
to 50 operators.
Access to the operators list can be denied to all operators except for the default operator (administrator)
listed as no.1