RISCO Group Upload/Download software - Manual (Page 41)

Chapter 5: Main Menu Bar Options
Page 38
5.5.1 ProSYS and WisDom End User Menu Options
Status display: For displaying the panel and the zones status,
and to send partitions and zones commands.
Example of a Status Display screen below:
The Status Display screen is divided into sections:
a. Zones: The Zone field displays the Zone status, with the
codes listed below. Use your mouse to navigate among the
zones. Zone codes:
Armed ‐ red Not ready ‐ grey
Alarmed ‐ red and
blinking
Panic
Bypass
Ready ‐ green
Day Zone Tampered
Trouble ‐ yellow Unused zone
Fire ‐ red and
blinking Zone not found (for
wireless)
Key switch Low battery (for
wireless)
Medical
b. Partitions: The Partitions area in the center of the screen
displays the Partitions status (armed, ready or alarmed). To
select a Partition, type a Partition number.
c. Trouble: The Trouble area on the right of the screen alerts
you to problems with the panel accessories.
d. Accessories: The Accessories area displays Accessories
status.
e. Date/Time: To synchronize the time settings on the panel to
the time settings of the PC click on the PC>Panel time button
and type in the information as follows:
Day/month/year/hour/minutes/AM‐PM
f. Freeze: Freezes display till it is pressed again.
g. No Sound: Deactivates the PC internal speaker after an
alarm has been sounded on the panel.
h. Save: Saves updated status in the Upload/Download
software.
1. Status
For setting the status of
the panel from the main
menu select End
User>Status and one of
these options:
Saved status
display: To save the current status display.