RISCO Group Upload/Download software - Manual (Page 36)

Chapter 5: Main Menu Bar Options
Page 33
5.3.2 WisDom Installer Menu Options
System
Parameters: See ProSYS table above. 1. System
From the main menu select
Installer>System and one of these
options:
System Codes: See ProSYS table above.
Dialer 1: See ProSYS table above. 2. Communication
You can set the systemʹs
communication parameters. From
the main menu select
Installer>Communication and one
of these options:
Dialer 2: See ProSYS table above.
Siren:
GSM:
X10:
You can set the type and configuration of
each device in your system. 3. Devices
From the main menu select
Installer>Devices and one of these
options:
Bus test: For performing bus test and reviewing
the test result.
Zone
parameters:
Zone crossings:
4. Zones
For setting zone configurations,
from the main menu select
Installer>Zones and one of these
options:
Soak test:
See ProSYS table above.
Report codes:
Special report
codes:
Auto SIA codes:
Auto contact ID
codes:
5. Report Codes
For setting the reporting codes in
the system, from the main menu
select Installer>Report Codes and
one of these options:
Reset codes:
See ProSYS table above.
6. Utility Outputs For setting the Utility outputs in the system, from the main
menu select Installer>Utility Outputs.
7. User Codes For setting the Authority levels in the system, from the main
menu select Installer>User Codes.