RISCO Group Upload/Download software - Manual (Page 44)

Chapter 5: Main Menu Bar Options
Page 41
4. A message box appears showing Operation completed successfully.
5.6.4 Download All
You can download all the client parameters to the Control Panel.
To download all data from the database for the currently selected client, to the panel:
1. From the main menu, select Comm>Download All. The following question appears: ʺAre you sure
you want to download all parameters to the control panel?ʺ
2. Click Yes to download all parameters to the control panel.
3. The Download all message box appears showing Writing User Codes – Please wait.
4. The Download progress bar appears indicating the percentage of the download completed.
5. A message box appears showing Operation completed successfully.
5.6.5 Verify Screen
To verify that the data information shown on the screen is identical to the data in the panel, from the main
menu.
1. Select the screen that you want to verify.
2. Select Comm>Verify Screen. The fields where there are differences are highlighted in green and
automatically toggle between the panel and the data base values.
To replace the database with the panel data (highlighted in green), click Yes. To keep the database as is
(highlighted in pink), click No.
5.6.6 Wait for Call
Normally, your modem is not initialized and you are not in a position to receive incoming calls to your
Upload/Download system. You can ready your system to receive a call from a client’s panel via the Wait
for Call option.
To activate Wait for Call:
From the menu bar, select Comm>Wait for Call. A message box appears telling you that the modem is
being initialized and that the system is waiting for the call. Of course the call must be initiated from the
panel side.
Now the procedure is as follows:
1. The User performs a ʺuser init. Callʺ from the keypad.
2. The Panel calls the Upload/Download, Access and ID codes are being verified.
3. The Upload/Download will automatically select the specific client according to the Panel ID.
5.6.7 Dial to Panel
Use the Dial to Panel option when you wish to connect to a panel via modem and phone line. Remember
that your system should be configured for modem communication.