RISCO Group Upload/Download software - Manual (Page 42)

Chapter 5: Main Menu Bar Options
Page 39
5.5.1 ProSYS and WisDom End User Menu Options
Set time and date: To set the time and date on the panel.
Note: Take the time difference into account if
you are in a different time zone.
Next arm/disarm: To set the times for the next arm/disarm of the
system.
Scheduler: To set the times for Arm/Disarm, Utility
Outputs and user limits.
2. Scheduling
For setting the times for
the options below, from
the main menu select End
User>Scheduling and one
of these options:
Vacation: For setting the arming/disarming of the system
while on vacation.
Access codes: For monitoring panel usersʹ authorization levels
and setting their user codes, type in access codes
for the Authority levels listed. The Authority
levels are generated from the User Codes
screen.
Programming: For entering Follow Me phone numbers and
Email addresses.
For entering the Keypad chimes and buzzer
state.
3. User Settings
From the main menu
select End User>User
Settings and one of the
options below:
Voice messages: For setting the types of voice messages you wish
to be notified of.
Arm partitions: To arm partitions, select the relevant partitions
or click All to arm all partitions. Click Arm to
activate the partition arming.
Disarm partitions: To disarm partitions, select the relevant
partitions or click All to disarm all partitions.
Click Dis. to activate the partition disarming.
Activate UO: To activate individual Utility Outputs, type in
the number of the Utility Output you require
and click the Activate button.
Note: Only Utility Outputs that are designated
as user activated in the Systems screen are listed
here and may be activated using the Activate
UO option.
Tamper bypass: Bypassing tamper alarm.
4. User Operations
From the main menu
select End User>User
Operations and one of the
options below:
Test bells and
keypads
(ProSYS)/ Testing
(WisDom): To send a command to activate and test bells
and keypads. When you select this option a
dialog box appears informing you if the test was
successful or not. Click OK.