RISCO Group axesplus® RDD User Manual

Page 19

RDD User Manual

Uncontrolled when printed

Table 3: Advanced CFG File – Field Description

Field

Description

Board Version

This is the field to specify the board version that you are using. Set this field
as 1 for the current version.

Throttle Rate

Here you mention the throttle rate at which data is sent, minimum rate is 10
kbps and default throttle rate is 1000 kbps.

ACCB Broadcast Port

All the data will be broadcasted between proxy and ACCB on this port. The
port has to be same as the proxy and its connected ACCB’s.

This port and Broadcast Port for back-up Proxy should be different. Both
the port addresses should not be blocked in the network.

RDD Broadcast Port

Discover command for devices is sent from Risco Device Discovery (RDD)
client on this port.

Number of Events to
Buffer in ACCB

It is the maximum number of events that the ACCB will buffer when RSP is
down.

ACCB Log Level

It is the ACCB log level. You can change it as per your requirement.

Number of Events to
Buffer in Proxy

It is the maximum number of events that the Proxy will buffer when RSP is
down.

RSP Connection
Interval (Min)

It is the semi-permanent connection interval.

RSP Heartbeat
Interval (Sec)

It is the RSP-Proxy heartbeat interval in seconds.

NTP Server IP Address

It specifies the NTP server IP to which the Proxy has to synchronize with.

NTP Server URL

It specifies the NTP server URL to which the Proxy has to synchronize with.

Proxy Log Level

You can determine the log level as Critical, Information or Debug by clicking
any option button.

RSP Port

It specifies the port through which Proxy will communicate with the RSP

Smart Client Port

It specifies the port on which the smart client will be listening for events

Broadcast Port for
back-up Proxy

Backup proxy will listen on this port for all the data broadcasted by the active
proxy. This port and ACCB Broadcast Port has to be different. Both the port
addresses should not be blocked in the network

LDAP Settings

The LDAP Server settings should be specified here.

Server IP Address

Enter the LDAP Server IP address.

Admin DN

Admin Password

Base DN

Search Filter