RISCO Group axesplus® RDD User Manual
Page 17
RDD User Manual
Uncontrolled when printed
© RISCO Group
16
Field
Description
PSTN Settings
Provide the user name, password and the dialling number if
the Proxy is connecting to the RSP using PSTN. This is
needed only if the PSTN module is mounted on the Proxy.
GSM Settings
Provide the user name, password and the access point if the
Proxy is connecting to the RSP using GSM. This is needed
only if the GSM module is mounted on the Proxy.
RSP Specific Settings
The settings for the RSP server are displayed.
Account ID
The account reference ID of the current account is
displayed.
RSP Address
Either the IP of the RSP or its URL is displayed.
Nat IP Address
This field is the NATTED IP field to get connected to the RSP.
Leave the value in this field as 0.0.0.0 if you do not want to
use it. If any valid IP is provided, then the Proxy will try to
get connected to the RSP through this IP.
Additional Gateway
Some networks may need an additional gateway to
connect o the external RSP IP or URL. If additional gateway
is required IP address of the gateway is given in this field.
6.2
View Advanced CFG file
To view the advanced CFG file and configure settings:
1. On the RDD home page, select the check box against the device for which you want to view the
CFG file.
Figure 10: Select a Device
2. Click Actions
View CFG File. The Configuration file for the selected device appears.
3. On the CFG File, click Advanced Settings. The Advance Configuration file appears.