Precision Digital PD6800 - Manual (Page 37)

PD6800-0L1 Loop-Powered Process Meter Instruction Manual
37
Level Input Multipoint Linearization (MULTIPT)
This menu enables multipoint linearization for scaling and calibrating of the level
display.
Setting MULTIPT to ENABLE will alter the level display Scaling (See Scaling the Meter
on page 24) and Level Calibration (See Level Input Live Signal Calibration on page
35) menus to include a Number of Points (NO PTS) parameter before entering Input 1.
32-point linearization can be used to linearize the display for non-linear signals.
Information (INFO)
The Information menu shows the software identification number and version number.
To determine the software version of a meter:
Go to the Information menu (INFO) and press ENTER button.
Continue pressing ENTER to scroll through the software release number and
software version.
Following the information display, the meter will exit the Advanced Features menu
and return to run mode.