Precision Digital PD6800 - Manual (Page 29)

PD6800-0L1 Loop-Powered Process Meter Instruction Manual
29
Disabling Password Protection
To disable the password protection, access the Password menu and enter the correct
password, as shown below.
If the correct five-digit password is entered, the meter displays the message UNLOCKD
(unlocked) and the protection is disabled until a new password is programmed.
If the password entered is incorrect, the meter displays the message LOCKED and
returns to Run Mode. To try again, repeat the above procedure.
Did you forget the password?
The password may be disabled by entering a master
password. If you are authorized to make changes, enter
the master password 50865 to unlock the meter.