Dsply – Precision Digital PD6800 User Manual

Page 26

PD6800-0L1 Loop-Powered Process Meter

Instruction Manual

Configuring the Display (DISPLAY)

The lower (BOTTOM) display may be configured to display a custom tag (TAG), volume
(VOLUME), volume and tag (VOL+TAG), percent of full height (PCT HT), or percent of full
height and tag (PCT+TAG), or be blank (OFF).
A custom tag may be up to seven alphanumeric characters programmed for
identification (e.g. TANK 3) or for engineering units (e.g. GALLONS).
Volume is a separate, second scale of the input process variable. This is configured
in Volume Display Scaling (VOLSCAL) on page 34.
Percent full height shows the percent full of the tank height level indicator
programmed in the Scaling the Tank Level Indicator (PERCENT) menu, on page 25.
The tank level indicator (GRAPH) may also be turned on or off from the display menu.

set

dsply

grapH

botnm

This manual is related to the following products:

PD6801 PD6701