Precision Digital PD6800 - Manual (Page 22)

PD6800-0L1 Loop-Powered Process Meter Instruction Manual
22
Setting Numeric Values
The numeric values are set using the RIGHT and UP arrow buttons. Press RIGHT
arrow to select next digit and UP arrow to increment digit.
The digit being changed blinks.
Press the ENTER button, at any time, to accept a setting.
Hold MENU, at any time, to exit and return to Run Mode. Changes made to settings
prior to pressing ENTER are not saved.
Press the MENU button during Programming Mode to return to return to the previous
menu selections.
Setting the Level Decimal Point (DECIMAL)
Decimal point may be set with up to four decimal places or with no decimal point.
Pressing the Right arrow moves the decimal point one place to the right and
pressing the Up arrow moves the decimal point one place to the left.
Note: The currently selected digit will blink. Pressing the
Right Arrow button will select the next digit, causing it to blink.
SETuP 1111.1 222.22