Loading paper, Loading paper in trays 1–4 – Xerox WorkCentre 7835ii User Manual
Page 56
Paper and Media
56
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
User Guide
Loading Paper
This section includes:
•
Loading Paper in Trays 1–4 ............................................................................................................................................. 56
•
Setting the Guide Locks in the 500-Sheet Adjustable Trays ............................................................................. 59
•
Loading Paper in Trays 3 and 4 of the Tandem Tray Module .......................................................................... 60
•
Loading Paper in Tray 5 .................................................................................................................................................... 62
•
Loading Paper in Tray 6 (High-Capacity Feeder) ................................................................................................... 64
•
Configuring Tray 6 in the High-Capacity Feeder .................................................................................................... 66
•
Changing Paper Size, Type, and Color ........................................................................................................................ 67
•
Changing Paper Size, Type, and Color ........................................................................................................................ 67
Loading Paper in Trays 1–4
1.
Pull out the tray until it stops.
2.
Ensure that the guide locks are set in the correct position for the standard or custom size paper that
you are loading. For details, see
Setting the Guide Locks in the 500-Sheet Adjustable Trays
on page
3.
Remove any paper that is a different size or type.
4.
To move the length and width guides out:
a.
Pinch the guide lever on each guide.
b.
Slide the guides outward until they stop.
c.
Release the levers.