beautypg.com

Replacing the second bias transfer roller – Xerox WorkCentre 7835ii User Manual

Page 216

background image

Maintenance

216

Xerox

®

WorkCentre

®

7800/7800i Series Color Multifunction Printer

User Guide

Replacing the Second Bias Transfer Roller

1.

A message appears on the control panel when the second bias transfer roller must be replaced.

Remove paper from the left tray, then fold up the tray.

2.

Open tray 5 (bypass) as shown (1).

3.

While lifting up the release lever (2), open the top left cover A as shown (3).

WARNING:

The area around the fuser can be hot. Use caution to avoid injury.

CAUTION:

Do not touch the transfer belt. Touching the belt can reduce image quality or damage the

transfer belt. Do not touch the transfer roller. Touching the roller can reduce image quality.

See also other documents in the category Xerox Multifunction Devices: