MINOURA EBS-3 - Manual (Page 2)

How To Assemble EBS-3
Required Tools: 2 x 13mm Spanner (ring type wrench is recommended)
1 x 10mm Spanner (ring type wrench is recommended)
1 x M4 Hex Wrench
1
2
!
- 2 -
Assemble Side Frame (both Right and Left side)
M6 Spring Washer
M6x10 Bolt
Assemble Side Frame with
M6x10 bolts and M6 spring
washers in the Parts-Pack #3.
Both frames are exactly same.
There is no fixed direction.
M6x40 Bolt
M6 Spring Washer
Collar (Short / 26mm)
Collar works to prevent deforming the tube
by being inserted together with bolt.
Do not miss it.
Connect Side Frames and
Beam Frame with M6x40
bolts, M6 spring washers
and Collar (short) in the
Parts-Pack #4.
Side Frames are
exactly same,
so the larger
hole for
inserting Collar
is always
located on the
left side.
Connect Side Frames
Beam Frame
Pillar (Short)
Pillar (Long)
Upper Frame
Lower Frame
!
Be sure the longer pillar
has fixed direction.
There is a hole on
the pillar side to be
connected with Beam
Frame. This side must be
on bottom.