MINOURA RDA2429 - Manual (Page 6)

The Mag unit provides 7 different levels of resistance power. It can be controlled via a manual lever
(RDA2429-D) or a remote shifter (RDA2429-R). L is the lowest and H is the highest power.
It's also possible to adjust the resistance power by shifting the bike gear. However, if you use the inner
front gear to reduce the power, it will increase the pedaling torque too much then it will make the pedaling
feel very jerky.
So we recommend you to adjust the power on the Mag unit for smoother and more realistic training.
How To Increase Power
How To Reduce Power
To reduce the power, slide the lever toward L symbol. (see Fig. I)
To increase the power, slide the lever towarwd H symbol. (see Fig. H)
On RDA2429-D, make sure the mag unit has stopped completely.
Do no touch any moving parts such as wheel or belt.
HOW TO ADJUST THE RESISTANCE LEVEL
!
Use just lighter level in the first 5 minutes for warming up your muscles and knee
to avoid accident.
You also should cool-down after session with lighter resistance.
!
The mag unit always has some resistance, even when setting at the lowest range.
Some slippage is normal when the resistance level on the trainer is set too high.
!
Increase Power
Reduce Power
Indicator
RDA2429-D (Non-Remote)
How To Increase Power
How To Reduce Power
To reduce the power, turn the lever toward L symbol (counter-clockwise).
(see Fig. J)
To increase the power, turn the lever toward H symbol (clockwise). (see Fig. J)
RDA2429-R (Remote)
(Fig. H)
(Fig. I)
(Fig. J)