Epson PictureMate 500 - Manual (Page 81)

Options and Consumable Products 81
R4CF95P
SHORT.bk
Rev. D
OPTN.FM A5 size
2/15/05
R Proof Sign-off:
H. Yamasaki CRE Nakano
M. Otsuka
editor name
En
glish
Removing the battery
1. Make sure that PictureMate is turned off.
2. Open the battery cover.
3. Move down the battery latch and pull out it.
4. Close the battery cover.
Charging the battery
After installing the battery, charge the battery using
the AC adapter.
1. Make sure that the battery is installed.
2. Connect the power cord and AC adapter, then
plug in PictureMate.
When PictureMate is off, the power light blinks
during charging. When the battery is fully
charged, the power light turns off.
When PictureMate is on during charging,
icon blinks on the LCD panel. When the battery is
fully charged,
icon appears.
Note:
The battery may not be charged correctly if the temperature
of the operation is not guaranteed.
Checking the battery status
Using the LCD panel
The battery status is always displayed at the top right
corner of the LCD panel.
Icon Status
Indicates low battery power