Epson PictureMate 500 - Manual (Page 18)

18 Preparing to Print
L Proof Sign-off:
H. Yamasaki CRE Nakano
M. Otsuka
editor name R4CF95P
SHORT.bk
Rev. D
DPRE.FM A5 size
2/15/05
2. Slide the top part of the paper support up gently
until it clicks into place.
3. Place your paper against the right edge, with the
glossy side up.
Note:
Make sure paper is glossy side up to prevent smearing.
4. Slide the left edge guide against the paper. Make
sure it is snug, but not so tight that paper can’t
move.
Note:
When you need more paper, order a PictureMate
PicturePack. See “Consumable Products” on page 79 for
more information.
Paper Handling Instructions
When storing printouts
❏ Do not touch the printed side or stack your
printouts until the ink is dry.
❏ To avoid scratching the image, be sure not to rub
the printed side of the paper. If the printed side is
rubbed too strongly, ink may come off the paper.
❏ Do not stack printouts with the image sides
touching.
❏ Do not stack printouts and conventional film
photographs with the image sides touching.
❏ If you stack printouts, place a sheet of plain paper
or other absorbent paper between the individual
prints.
Edge guide
Load glossy side up