Sealey PP7 User Manual
Page 6
environmental Protection.
recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
When the product is no longer required, it must be disposed of
in an environmentally protective way.
notEs
3.12 checking for Bad earth.
3.12.1 Probe the suspected earth wire or contact with
the probe.
3.12.2 observe the green negative (-) LED. Depress the
power switch forward then release.
3.12.3 if the green negative sign (-) LED went out and
the red positive sign (+) came on, this is not a true
earth.
3.13 following and locating short-circuits.
3.13.1 in most cases a short circuit will appear by a fuse
or a fusible link blowing or an electrical protection
device tripping (i.e. a circuit breaker).
this is the best place to begin the search.
3.13.2 remove the blown fuse from the fuse box. use
the Probe to activate and energize each of the
fuse contacts. the contact which trips the Probe
circuit breaker is the shorted circuit (see “circuit
Breaker” paragraph 3.4.1). take note of this
wire’s identification code or colour.
3.13.3 follow the wire as far as you can along the wiring
harness. for instance if you are following a short
in the brake light circuit you may know that the
wire must pass through the wiring harness at the
door sill. Locate the colour-coded wire in the
harness and expose it.
3.13.4 Probe through the insulation with the Probe tip
depress the power switch forward to activate
and energize the wire. if the Probe circuit breaker
tripped (LCD display “C B”) you have verified the
shorted wire.
3.13.5 cut the wire and energize each end with the
Probe the wire end which trips the Probe circuit
breaker again is the shorted circuit and it will lead
you to the shorted area. follow the wire in the
shorted direction and repeat this process until the
short is located.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPortant: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inforMation: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
sole uK distributor, sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
iP32 7Ar
Original Language Version
01284 757500
01284 703534
www.sealey.co.uk
Web
© Jack sealey Limited
PP7 issue: 1 - 19/11/12