Sealey VS8220 User Manual

Page 3

Page 3

Original Language Version

VS8220 Issue: 2(SP) - 23/09/13

1.5. operating safety

1.5.1. use the tool only as directed.

do Not operate the tool unless the instruction

manual has been read thoroughly.

1.5.2. the display unit is not waterproof. the imager head and cable are waterproof,

but not acidproof or fireproof. Avoid submersing the imager head and cable into

corrosive, oily places and be sure to keep the imager head and cable away

from high temperature objects.

1.5.3.

do Not immerse the display unit in water.

1.5.4.

do Not use excessive force to insert or withdraw the imager head and cable.

this may result in damage to the tool or inspection area.

1.5.5.

do Not use the imager head and cable to modify surroundings, clear

pathways or clogged areas.

1.5.6.

do Not place the imager head and cable into anything or anywhere that may

contain a live electric charge or moving parts.

1.5.7.

do Not use the tool for personal inspection or medical use in any way. this is

Not a medical tool.

1.5.8.

do Not eat or smoke while operating the tool. use hot, soapy water to wash

hands and other body parts exposed to drain contents after using the tool to

inspect drains and other areas that may contain chemicals or bacteria.

1.5.9. When the inspection is completed, carefully withdraw the imager head and

cable from inspection area.

1.5.10. store components and accessories out of the reach of children and other

untrained persons.

1.5.11. Maintain the tool with care. Properly maintained tools are less likely to cause

injury.

1.5.12.

do Not drop the tool. If the tool is accidently dropped, check for damage.

1.5.13. Always wear appropriate personal protective equipment whilst handling and

using the tool. A full range of PPe is available from your sealey dealer.

1.5.14. Protect against excessive heat. the tool should be kept away from heat

sources.

do Not use the tool near moving machinery or in areas where the

temperature will exceed 113°f (45°c).

1.5.15. After use, store the tool in a safe, dry, childproof area.