beautypg.com

Sealey ATB0615 User Manual

Spring balancers, Instructions for models

background image

ATB0615.V2, ATB1530.V2 - 1 - 12/05/05

ATB0615.V2, ATB1530.V2 - 1 - 12/05/05

SPRING BALANCERS

INSTRUCTIONS FOR MODELS:

ATB0615.V2, ATB1530.V2

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY

AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

SPRING BALANCERS

INSTRUCTIONS FOR MODELS:

ATB0615.V2, ATB1530.V2

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY

AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

These spring balancers are designed to support the weight of frequently used tools such as air tools. They help

reduce operator fatigue and keep the benches and production lines free of clutter. Simple clip-on tool

attachment fitted to multi-strand steel cable and with fine tension adjustment by way of a large plastic knob.

These spring balancers are designed to support the weight of frequently used tools such as air tools. They help

reduce operator fatigue and keep the benches and production lines free of clutter. Simple clip-on tool

attachment fitted to multi-strand steel cable and with fine tension adjustment by way of a large plastic knob.

2. OPERATION

1. INTRODUCTION

1. INTRODUCTION

01284 757500

01284 703534

E-mail: [email protected]

Sole UK Distributor

Sealey Group,

Bury St. Edmunds, Suffolk.

Web address: www.sealey.co.uk

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and

component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of

our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.

2. OPERATION

01284 757500

01284 703534

E-mail: [email protected]

Sole UK Distributor

Sealey Group,

Bury St. Edmunds, Suffolk.

Web address: www.sealey.co.uk

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and

component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of

our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.

Model:

ATB0615 ATB1530

Max load (kg)

Min load (kg)

1.5

3

0.5

1.5

Cable length

1.5mtr

1.5mtr

Model:

ATB0615 ATB1530

Max load (kg)

Min load (kg)

1.5

3

0.5

1.5

Cable length

1.5mtr

1.5mtr

p

p

Warning! When no load is applied or a load is

removed, continue to hold the cable and allow it

to retract in a controlled fashion. Sudden

release of the cable could cause injury.

2.1.

Hang the balancer from a suitable hook, using the

hole provided.

p

p

Warning! Ensure the hook used is capable of

supporting the combined load of the balancer

and any tools that may be attached.

2.2.

Turn the dial anti-clockwise to increase the

spring tension i.e. for use with heavier tools.

p

p

Warning! Do not over tighten as this may well

damage spring and mechanism.

2.3.

To decrease the spring tension i.e. for use

with lighter tools, activate the release lever and

allow the dial to turn clockwise.

2.4.

To alter the length of cable that remains outside the

balancer housing when fully retracted; loosen the

two screws holding the plastic stopper, reposition

the stopper as desired,and re-tighten the screws.

2.5.

Clip the end of the cable to the required tool.

p

p

Warning! Ensure the tool is clipped securely to

the cable and does not exceed the maximum

load capacity of the balancer.

Important! Do not attempt to disassemble.

Balancer contains a spring under tension which

could cause serious injury. Any repairs must be

carried out by an authorised service agent.

p

p

Warning! When no load is applied or a load is

removed, continue to hold the cable and allow it

to retract in a controlled fashion. Sudden

release of the cable could cause injury.

2.1.

Hang the balancer from a suitable hook, using the

hole provided.

p

p

Warning! Ensure the hook used is capable of

supporting the combined load of the balancer

and any tools that may be attached.

2.2.

Turn the dial anti-clockwise to increase the

spring tension i.e. for use with heavier tools.

p

p

Warning! Do not over tighten as this may well

damage spring and mechanism.

2.3.

To decrease the spring tension i.e. for use

with lighter tools, activate the release lever and

allow the dial to turn clockwise.

2.4.

To alter the length of cable that remains outside the

balancer housing when fully retracted; loosen the

two screws holding the plastic stopper, reposition

the stopper as desired,and re-tighten the screws.

2.5.

Clip the end of the cable to the required tool.

p

p

Warning! Ensure the tool is clipped securely to

the cable and does not exceed the maximum

load capacity of the balancer.

Important! Do not attempt to disassemble.

Balancer contains a spring under tension which

could cause serious injury. Any repairs must be

carried out by an authorised service agent.

This manual is related to the following products: