beautypg.com

Sealey VS7233 User Manual

Vs7233, Stud extractor set, Safety instructions

background image

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly

maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND

CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY

CAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

INSTRUCTIONS FOR:

STUD EXTRACTOR SET

MODEL No:

VS7233

2. INTRODUCTION

3. CONTENTS

4. SIzE GUIDE CHART

7

Do not use the stud extractor set for any purpose other than for which it is designed.

3

Keep the kit free from dirt and grime.

3

Ensure your work area is tidy and free from hazards.

3

Ensure the correct sizes of guide and drill are used to avoid injury and damage to the set.

WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover

all possible conditions and situations that may occur. It must be understood that common sense and

caution are factors which can not be built into this product, but must be applied by the operator.

VS7233 Issue No: 1 - 23/11/10

Original Language Version

Suitable for the removal of broken studs and bolts. Supplied with centring pilots for Ø4.75-9.75mm studs, drills,

extractor shafts and nuts. Ideal for engine manifold studs.

Stud size

4.0

4.75

4.75

4.75

6.1

7.2

7.2

7.2

9.0

9.75

12

15

Guide size

B1

B2

B3

B4

B5

B6

B7

B8

B9

B10

-

-

Guide ext. Ø

6.0

8.0

9.0

10.0

10.0

11.0

12.0

13.0

13.0

14.0

-

-

Drill to use

3.2

3.2

3.2

3.2

4.8

4.8

4.8

4.8

6.4

6.4

8.0

8.9

Pin to use

PIN 1

PIN 1

PIN 1

PIN 1

PIN 2

PIN 2

PIN 2

PIN 2

PIN 3

PIN 3

PIN 4

PIN 5

Hex extractor

D1

D1

D1

D1

D2

D2

D2

D2

D3

D3

D4

D4