Preliminar y, Reference information, Specifications – Extron electronic IN1404XT User Manual
Page 74
IN1404XT Video Scaler and Switcher • Reference Information
A-2
Reference Information
PRELIMINAR
Y
Specifications
Video input
Number/signal type ................... 2 RGBHV, RGBS, RGsB, RGBcvS, component video
4 S-video, composite video
Connectors ................................... 2 x 5 female BNC (inputs 3 and 4, all video formats)
(2) 4-pin mini DIN (inputs 1 and 2, S-video)
2 female BNC (inputs 1 and 2, composite)
Nominal level ............................... 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ....... 0V to 1.0V p-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. Autoscan 15 kHz to 60 kHz (RGB)
Vertical frequency ....................... Autoscan 50 Hz to 120 Hz
Resolution range .......................... Autoscan 720 x 525 to 1600 x 1200
Video processing
Decoder ......................................... 8 bit digital
Digital sampling ........................... 24 bit, 8 bits per color
Colors ............................................ 16.78 million
Video output
Number/signal type ................... 2 RGBHV, RGBS, RGsB, scaled RGB
1 set of proprietary analog signals
Connectors ................................... 5 BNC female
(1) 15-pin HD female
1 RJ-45 female
Nominal level ............................... 0.7V p-p
Minimum/maximum levels ....... 0V to 0.7V p-p
Impedance .................................... 75 ohms
Scaled resolution .......................... 640x480
2,4,5,6,7,8,9
, 800x600
2,4,5,6,7,8,9
, 852x480
2,4,5,6,7,8,9
, 1024x768
2,4,5,6,7,8
,
1152x864
2,4,5,6,
, 1280x720
2,4,5,6,7,8
, 1280x768
1,2,3
, 1280x1024
2,4,5,
, 1365x768
2,4,5
,
1365x1024
2
1
= at 56 Hz
2
= at 60 Hz
3
= at 65 Hz
4
= at 72 Hz
5
= at 75 Hz
6
= at 85 Hz
7
= at 96 Hz
8
= at 100 Hz
9
= 120 Hz
Switching type .............................. Seamless or RGB delayed switching
Sync
Input type ..................................... RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS, RGsB
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ..................................... 0V to 5.0V p-p
Output level .................................. 0V to 5.0V p-p
Input impedance .......................... 1 kohms
Output impedance ....................... 75 ohms
Max input voltage ........................ 5.0V p-p
Polarity .......................................... Positive or negative (selectable)