Extron electronic IN1404XT - Manual (Page 33)

3-13 IN1404XT Video Scaler and Switcher • Operation
• Standard — For standard 1.33 inputs (also known as full screen).
• Anamorphic — Provides vertical image squeezing to accommodate
anamorphically enhanced DVDs (1.85).
• Wide screen — For wide 1.78 inputs (letterbox).
• Wider screen — For wider screen 2.35 inputs (narrow letterbox).
• Tomarama — Expands a 16:9 signal to fill a 4:3 screen (1.78). As it expands
the signal, it cuts off the left and right sides, simulating the movie aspect ratio
“Cinemascope”.
To change the selected aspect ratio, use the Menu or buttons to highlight the
desired ratio and press the Enter (and save) button.
Most VCRs and satellite receivers output a signal with a 4:3 aspect ratio. How this
signal is filled with video determines its aspect ratio. Figure 3-10 shows four
examples of different input aspect ratios in their native 4:3 format and as they
appear after scaling.
Aspect ratio setting:
Standard
4:3 display
Example 1: Standard Example 2: Wide screen
16:9 display
Aspect ratio setting:
Wide screen
4:3 display
16:9 display
Example 3: Anamorphic Example 4: Tomarama
Aspect ratio setting:
Anamorphic
Aspect ratio setting:
Tomarama
4:3 display
16:9 display
Figure 3-10 — Aspect ratio examples
Auto Switching screen
The Auto Switching screen indicates whether the scaler’s autoswitching feature is
turned on or not and the provides the ability to turn autoswitching on or off. When
autoswitching is on, the scaler automatically switches to the highest numbered