Extron electronic IN1404XT - Manual (Page 30)

Operation, cont’d
IN1404XT Video Scaler and Switcher • Operation 3-10
Enter
15 sec.
15 sec.
Menu
Menu
1 6
Menu
Menu
a s s B
1 6
r e b l e T
1 6
e a l a n c B
15 sec.
Ye s No
s e A d i Re u t o
Enter
(save)
Enter
(save)
Enter
(save)
Enter
(save)
r e b l e
a s s
T
B
d i o Au
l a n c e Ba
i o s e t Au Re d
No
menu
display
Figure 3-8 — Audio menu flowchart
Treble screen
The Treble screen displays a status indicator that shows the treble setting for the
selected input. Treble enhances or attenuates the higher frequencies of the audio
signal. Use the Menu and buttons to increase or decrease the higher frequencies
through a range of 8 to 25. The default setting is 16 (0dB, no gain or attenuation).
Balance screen
The Balance screen displays a status indicator that shows the balance setting for the
selected input. Balance shifts the stereo audio signal to the left or right channel in
incremental steps. Use the Menu (left) and (right) buttons to shift the audio to
the left and right through a range of 0 to 31. The default setting is 16 (audio in the
center).
Reset Audio screen
The Reset Audio screen provides the ability to reset all of the audio settings for the
selected input to the factory defaults. Use the Menu button to highlight “Yes”
and press the Enter (and save) button to reset the audio input. Use the button to
highlight “No” and press the Enter button to exit the screen without resetting the
audio input (or back out of the screen by pressing the Menu button).