Eagle Electronics SeaCharter 502cDF - Manual (Page 67)

59
Depth Cursor
The depth cursor consists of a horizontal line with a digital depth box on
the right side. The numbers inside the box show the depth of the cursor.
The cursor can be moved to any location on the screen, letting you pin-
point the depth of a target.
1. From the Sonar Page, press MENU |
↓ to
D
EPTH
C
URSOR
| ENT .
2. The depth cursor appears. Press
↓ ↑ adjust cursor line depth.
3. To clear the depth cursor, press EXIT .
Depth Range - Automatic
When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. However, depending upon the bottom
depth and the current range, you can change the range to a different
depth. To do this:
1. From the Sonar Page, press MENU |
↓ to
D
EPTH
R
ANGE
| ENT .
2. The Depth Range Control Scale appears. Press
↑ ↓ to select a differ-
ent depth range. A blue bar highlights the selected range. Range num-
bers in light blue cannot be selected.
3. When the new range is selected, press EXIT to clear the menu.
Sonar Page with Depth Range selected (left).
The Depth Range Control Scale (right).
Depth Range - Manual
You have complete control over the range when the unit is in the man-
ual mode. There are 16 depth ranges, from 5 to 4,000 feet.