Eagle Electronics SeaCharter 502cDF - Manual (Page 158)

150
The height scale on the top right side of the graph changes, based upon
the maximum range of the tide for that day. The MLLW line also ad-
justs its position as the height scale changes.
You can look up tidal data for other dates by changing the month, day
and year selection boxes. To select another date:
1. Use
← →
to highlight month, day or year, then press ENT .
2. Use
↑ ↓ to select the desired month, day or year and press
ENT .
To clear the information screen, press EXIT .
Navionics

Charts
Your unit can also display Navionics electronic charts on MMCs. Like
NauticPath, Navionics charts contain tide and port service information.
NOTE:
The primary operational difference between a NauticPath chart
and a Navionics chart is the way the chart data is set up for dis-
play. NauticPath charts are ready for display as soon as they are
inserted into the unit. Navionics charts must be inserted into the
unit, then selected as a Map Choice option in the Map Data menu.
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
2. From the Map Page, press MENU |
↓ to
M
AP
D
ATA
| ENT |
↓ to
M
AP
C
HOICE
| ENT . Select the Map Name, then press ENT | EXIT | EXIT .
Map Choice highlighted on Map Data menu (left). Miami Navionics
chart selected from Map Choice menu (right).