Eagle Electronics SeaCharter 502cDF - Manual (Page 124)

116
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT to activate the selec-
tion box, use
↓ ↑ to highlight the file, then press
ENT to accept the se-
lection. Next, press
↓ to
L
OAD
D
ATA
| ENT . The unit will display a comple-
tion message when the data transfer is finished. To return to the Page
view, press
EXIT repeatedly.
These figures show the menu sequence for loading a GPS Data File
from an MMC into the unit's memory.
Cancel Navigation
You can turn off any of the navigation commands after you reach your
destination or at any other time by using the Cancel Navigation com-
mand. Press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT | ← to Y ES
| ENT .
Figure 3.
Figure 2. Figure 1.
Figure 4.