Eagle Electronics SeaCharter 502cDF - Manual (Page 130)

122
Fig. 4. Point (3) set at channel mouth. Fig. 5. Waypoint (4) set further
south along the beach, at a recognizable landmark (Bob Hall Pier).
Waypoint PLFM Q W ends the route at an oil platform some distance
from the shore. Fig. 6. Press
EXIT to save the route and you return to
this screen.
6. Move the cursor to the next point in the route, a spot where you need
to turn or change direction and press
ENT to set the next waypoint.
7. Repeat step six until the route reaches your destination.
8. To save your route, press EXIT . The unit reverts to the Edit Route
screen, with the route automatically named "Route 1" and stored in the
unit's internal memory.
You can edit the route and run other commands, but if you are finished
with the route for now, r e t u r n t o t h e l a s t p a g e d i s p l a y e d b y
p r e s s i n g
EXIT repeatedly.
NOTE:
When adding waypoints to an existing route, the inserted way-
points will appear in the route in front of the waypoint you have
selected in the Edit Route menu. To insert waypoints at the end of
the route, make sure to select
(R OUTE END ) before adding them.
Delete a Route
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to route name|
ENT .
3. Use the arrow keys to select D
ELETE
R
OUTE
from the action win-
dow| ENT |
← to
Y
ES
| ENT .
5. 6. 4.