Eagle Electronics SeaCharter 502cDF - Manual (Page 173)

165
NOTE:
Since the Go To waypoint command is highlighted, you can navi-
gate to the selected POI by pressing
ENT | EXIT .
Find Interstate Highway Exits
1. From the Map Page, press MENU |
↓ to
H
IGHWAY
E
XITS
| ENT , which calls
up the Find Exit menu.
Find Highway Exits command (left) and Find Exit menu (right).
2. First, select a highway name by pressing ENT , which calls up the
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press
↑ ↓ to
change the first letter, then press
→ to move the cursor to the next let-
ter and repeat until the name is correct, then press ENT | ENT . B. Jump
down to the lower selection list by pressing ENT , then press
↓ ↑ to select
a highway from the list, then press ENT .
Find By Name menu (left). Find Exit menu with exit selected (right).