Eagle Electronics SeaCharter 502cDF - Manual (Page 182)

174
then press
→ to move the cursor to the next letter and repeat until the
name is correct, then press ENT | ENT . B. Or you can jump down to the
lower selection list by pressing ENT , then press
↓ ↑ to select a waypoint
from the list, then press ENT . The waypoint information screen appears.
Find By Name menu (left). Waypoint Information screen (center). The
found waypoint is highlighted by the cursor on the Map Page (right).
A. To navigate to the waypoint, press ENT . (Go To Waypoint com-
mand is already highlighted.) The unit will show navigation infor-
mation to the waypoint.
B. To find the waypoint, press
→ to
F
IND
O
N
M
AP
| ENT . The Map
Page appears with the cursor highlighting the found waypoint.