Eagle Electronics SeaCharter 502cDF - Manual (Page 170)

162
In search results, the distance and bearing to the selected item will be
calculated from the current position. In the case of a cursor search, the
search results show distance and bearing from the cursor, but an indi-
vidual waypoint's information screen shows distance and bearing from
the cursor.
Find Addresses
1. From the Map Page, press MENU |
↓ to
F
IND
A
DDRESS
| ENT .
2. Press ENT to search in the Address field.
3. To enter an address, press
↑ ↓ to change the first number, then press
→ to move the cursor to the next number and repeat until the address
is correct and press
ENT .
4. To enter a street name, press
↓ to
S
TREET
| ENT . There are two options:
A. You can spell out the name in the top selection box. Press
↑ ↓ to
change the first letter, then press
→ to move the cursor to the next let-
ter and repeat until the name is correct, then press ENT | ENT . B. Jump
down to the lower selection list by pressing ENT , then press
↓ ↑ to select
a street name from the list, then press ENT . The street name you se-
lected is now in the street field.
Find Address menu (left). Find Street menu (center)
with Find By Name field active. Street name entry complete (right).
5. To enter a city name, press
↓ to
C
ITY
| ENT . You will be asked if you
want to find addresses within a particular city
NOTE:
We recommend that you do not enter a city name unless the list you
are given is too large when searching without it. This unit can ac-
tually search quicker without a city and you save time by not en-
tering a city name.