Eagle Electronics SeaCharter 502cDF - Manual (Page 138)

130
press
→ to the next character and repeat until distance is correct. Press
ENT .
6. Press
↓ to
B EARING
| ENT . Press
↑ ↓ to change the first character, then
press
→ to the next character and repeat until the bearing is correct.
Press ENT .
7. Press
↑ to
P
ROJECT
| ENT . The Edit Waypoint menu appears. You can
save the new projected waypoint by pressing EXIT | EXIT or you can edit
the waypoint. Press EXIT | ENT if you want navigate to the waypoint.