Eagle Electronics SeaCharter 502cDF - Manual (Page 174)

166
3. Once you have selected a highway name you can then select an exit.
Press
↓ to switch to the Exit List, then press ↓ ↑ until you highlight the
exit, then press ENT.
4. In the Exit Information screen you have two choices. A. Press
ENT | ENT to navigate or go to the exit. B. Press ENT |
→|
ENT to find the
exit on the map.
Go To Exit option (left). Find On Map option (right).
Tip:
You can also look up some additional information on the Exit Serv-
ices located near this exit. Press
↓ to
S
ERVICES
|press
↓ ↑ to select
Service Name| ENT .
Exit Information screen (left) general location
and amenities information (right).